Construction machinery mainly includes loading trucks, excavators, forklifts and other equipment used for construction. These devices are characterized by large size and high energy consumption. Therefore, match the heat sink with a high heat dissipation efficiency. The working environment of heat dissipation module of construction machinery is different from that of automobile. The radiator of a car is often placed forward in the front, sunk into the power compartment and close to the intake grille. In order not to occupy the power compartment space, the manufacturer often uses the radiator with larger upwind area and smaller thickness. The characteristics of radiator layout in construction machinery are opposite. Taking the loader as an example, since the loader needs to maintain the accuracy of the direction of travel when working, the driver needs to observe the road conditions in real time, so the installation position of the power cabin should not be too high, the geometric size should not be too large, and the layout of the large windward surface similar to that of the car is not allowed. The radiators in the power bay are usually mounted in a centered manner with the cooling fans. The upwind area is usually slightly smaller than the size of the power cabin section, and the thickness is larger.

After more than ten years of development, Soradiator Group has formed a perfect model system in the field of construction machinery radiator. Our construction machinery radiators can cover Catapiller, Doosan, Hyundai, JCB and other mainstream engineering equipment, including excavators, trucks, forklifts, loaders, cranes, etc., with model coverage of up to 97%. At the same time, we can also produce radiator for generator sets, and special equipment radiator, such as offshore drilling platform radiator. We support the cooperative development of the latest models. Market models are being iterated and updated all the time. Soradiator is highly innovative and inclusive, and can be developed together with customers in.